Home / Garages / Vertical Roof / 54x40 Metal Garage

UP TO20%OFF

SKU PB#265

54x40 Metal Garage

Starting At

$33,463.00*

Free Delivery & Installation | Made in USA

(* Price is Only for Florida | Prices vary by state, location, & customization.)

Width54'

Length40'

Height12'

Most Searched Tags

Commercial Buildings 40-Wide Buildings Metal Garages Storage Buildings Workshops Side Entry Garages Garage with Lean-To

Building Description

54x40 Metal Garage gives you an enclosed center and a shorter lean-to positioned toward the back on the right. Mocha Tan roofing, walls, and trim create a warm, consistent exterior. The center has two front roll-up doors and another at the rear. A diamond-window walk-in door and side windows add pedestrian access and daylight. The lean-to has open ends, a closed outer wall, and additional garage frameouts.

Plan the main interior for vehicles, lawn mowers, golf carts, tractors, or a mechanic shop. Use the adjoining covered area according to the access its open ends provide. Frameouts allow for separately supplied components rather than included finished doors. The different sections let you separate activities while retaining a coordinated exterior with vertical siding beneath a vertical roof. Every ProBuilt garage is made in the USA. Delivery and installation are free. Customize it in our 3D designer today.

Building Specifications

Building Type: 54x40 Metal Garage

Overall Size: 54'W x 40'L x 12'H

Center Building: 42'W x 40'L x 12'H (Roof Length 41')

Roof Style & Pitch: Vertical (A-frame structure with vertical roof panels); Roof Pitch: 3/12

Frame & Panels: 14 Ga Galvanized Steel Frame; Roofing & Siding: 29 Ga Panels

Leg Spacing & Bracing: 5' Distance On Center, Braces On Every Leg; Leg Configuration: Double Legs

Wall Panel Orientation: Vertical

Certification: 150 MPH Wind Load (Incl. Lean-tos)

Installation & Anchors: Concrete Surface; Rebar Anchors or Cement Anchors

Right Lean-To: 12'W x 20'L x 9'H, 2/12 Roof Pitch, Back Aligned

Center Walls (All Ends & Sides): Closed, Vertical

Right Lean-To Front & Back Ends: Open

Right Lean-To Side Wall: Closed, Vertical

Installation Equipment: Lift Required

Garage Doors: Three 10'x10' Roll-Up Doors (Two on Front Wall; One on Back Wall; White, Certified)

Walk-In Door: 36"x80" Door with Diamond Window on Right Wall

Windows: 2 24"x36" White Grid Windows on Right Wall

Garage Door Frameouts: Two 8'x8' Roll-Up Frameouts on Right Lean-To Side Wall (White)

Colors: Roof, Trim & Wall: Mocha Tan

Warranty: 20-Year Warranty on Roofing Material

Workmanship Warranty: 1 Year

Customize Your Building to Fit Your Needs

What Our Customers Say

Similar Buildings

PB#5

UP TO20%OFF

30x45 Steel Garage

Financing Options Available

Free Delivery & Installation

PB#9

UP TO20%OFF

30x40 Metal Garage Building

Financing Options Available

Free Delivery & Installation

PB#12

UP TO20%OFF

30x50 Metal Building

Financing Options Available

Free Delivery & Installation

Stronger Roof Panels. Backed by Our 20-year roofing material warranty

54x40 Metal Garage Questions Answered

A shorter side shelter, drive-through planning, prepared openings, and pedestrian access.

No. The right lean-to is 12 by 20 feet and aligned toward the back of the 42-by-40-foot center. It is shorter than the main garage.

Two 10-by-10-foot doors are on the front and one is on the back. Confirm aisle alignment and both approaches if you want to move vehicles through the building.

A right-wall walk-in door with a diamond window and two right-wall 24-by-36-inch windows are specified. Confirm their placement relative to stored vehicles and equipment.

The 54-foot width includes the side lean-to, whose ends are open. The enclosed center is 42 by 40 feet; use the drawings to plan indoor versus covered outdoor space.

The lean-to side lists two 8-by-8-foot frame-outs. These are prepared openings, not installed roll-up doors; confirm any added doors separately.

Still Have Questions About Your Metal Building?

Connect With Our Building Specialists Today!